Bitmask, In your first post in this topic there is a picture. My issue is when I press the Green up arrow to cycle through ships it looks at only the even number IDs. When I press the Down green button it cycles through the even IDs until it reaches the highest ID. It then goes to the lowest odd ID and only cycles through odd IDs after that.
Ships IDs: 111, 112, 113, 114, 115, 116
Pressing up it cycles through: 112, 116, 114, 112 (skipping odd numbers)
Pressing down starting from an even number: 112, 114, 116, 111, 113, 115, 111 (skipping even numbers after first cycle)
I have noticed this in the past with No Frills 119, but it was infrequent and never had the time to report. In No Frills 130 it is happening on turn 1 with Player 11 rst.
I have tried installing Winplan32 3.6.63 on XP 32 bit and 64 bit Virtual Machines, Windows 98 SE Virtual Machine, and on my Windows 7 host machine. All installations I have the same issue.
I have tried Winplan32 3.6.62 and 3.6.45 and I have the same issue.
I've installed WinPlan 3.52.025 on the Windows 98 SE and it cycles through the ships as expected.
Also for the first time Echoview cannot find these ships if I use Shift + F3 to see the next turn prediction. If I click where they were, Echoview closes without as much as a warning message. This is also my first time playing a Wandering Tribes game so I don't know if that is expected or not.